The Safe Way to Clean and Sanitize Your Drive Thru Equipment
By HME • January 15, 2025 • 2 minute read
Share
When it comes to drive thru headset maintenance and cleansing there are two different approaches. Regular maintenance is required to keep headsets (and other equipment) in good operating condition, and HME makes it easy to maintain and repair your equipment with our Drive Thru Equipment Maintenance Agreement (EMA).
The second approach involves keeping your headsets clean and sanitized on a regular basis. It may seem unlikely that crewmembers can contract infections and disease from a small earmuff or mouthpiece, but it can happen due to carelessness or neglect of sanitation procedures. HME recommends the following guidelines for routine cleaning and sanitizing of your headsets. Keep in mind that these guidelines apply only to external surfaces and not to internal.
Safety
If possible, turn off the headset before starting to clean. Always take precautions such as wearing gloves and working in an area with proper ventilation.
Avoid These Cleaners
Do NOT use harsh or abrasive cleaners of any kind, including sanitizing wipes. HME equipment contains materials and surfaces that may be damaged or deteriorate prematurely, so never use any of these cleaners in your sanitation process:
Ammonia-based disinfectant wipes
Ammonia-based cleaners
Nail polish remover or any acetone-based solution
Hydrogen peroxide cleaners
Know the Right Cleaners
Use alcohol-based disinfectant wipes with a concentration of 50-70% isopropyl alcohol, which can be purchased pre-mixed. Be aware that alcohol concentrations above 50% do NOT increase their usefulness for sanitizing.
The Right Way to Clean
Turn off and disconnect the headset, and be sure to power off and remove the battery before cleaning. Wipe the surface of the headset with a dry microfiber cloth to remove dust and dirt. DO NOT spray anything directly onto headsets or any HME equipment.
Always spray the water-isopropyl solution onto a microfiber cloth before rubbing the headset. Make sure the cloth, or the alcohol-based disinfectant wipe, is damp but not wet.
Avoid applying too much pressure. Instead use a smooth, steady pressure to prevent damaging buttons, keys, displays or surfaces. Replace any foam parts, such as earpads, when necessary. You can order them directly online at the HME Store /shop/collections/all/, or by contacting your local authorized HME dealer.
HME does not claim or guarantee that cleaning and sanitizing HME equipment in this way will protect the user of the equipment from any virus, bacteria or other pathogen. Medical concerns should be directed to health care professionals.
Share