How to Keep Your Headsets Clean and Germ-Free
By HME • July 12, 2021 • 2 minute read
Share
Drive thru headsets that produce exceptionally clear sound, such as the EOS | HD from HME, provide a powerful tool for improving speed of service and order accuracy. Yet, headsets also excel at attracting dust, food crumbs, germs, bacteria and other particles that can reduce sound quality or cause them to stop working.
Worse, unless cleaned and sanitized on a regular basis, headsets can pass harmful pathogens from one employee to another. Here’s how to protect against that unwanted event in your restaurant.
Start by placing a clean, soft towel in a container of multi-surface disinfectant and cleaner (MSDC) that contains peroxide. Let it soak for a few minutes. Make sure the headset is turned off; then remove the battery and foam earpad.
Check the condition of the microphone windscreens and earpads. Gently clean the earpads with warm soapy water, spray with the with MSDC, and allow them to air dry. Cleaning and sanitation can lengthen the lifetime of these headset parts, but eventually they will need to be replaced.
Next, thoroughly clean the headset surface and battery unit, using a damp cloth and a bit of mild soap to remove dirt and grease. A soft toothbrush can be used to scrape away tiny food particles that get caught in the crevices around the buttons. Never spray cleaners or solvents directly onto the headset as this can cause corrosion.
To sanitize the headset, spray MSDC into a clean soft towel that has been lightly dampened. Gently rub this on all surfaces of the headset to kill germs, being extra careful when sanitizing the mouthpiece. Place the headset in an area away from moisture and allow it to fully dry before the next use.
It’s also a good idea to clean the headset batteries on a regular basis, as this will extend their service life while ensuring reliable performance. Use a damp cloth (a small amount of soap is okay) to wipe down the batteries and the area where they go in the battery charging unit.
Be sure to unplug the charger before cleaning it. As with the headset, do not spray cleaners or solvents onto the charger. Also, avoid overcharging the batteries. Recharging them only when they are low on power will give longer performance before having to recycle them.
Share