Blog Maintenance & Support

How to Extend the Life of Your Headsets

By HME • July 8, 2019 • 2 minute read

Share

Quality headsets, like the EOS | HD from HME, are essential for fast, efficient drive thru operations. But they can take a real beating in the rough-and-tumble environment of a drive thru kitchen. In addition to the normal daily wear and tear, headsets can get wet, dropped and stepped on, and more. They can even get dropped in the fryer, which does not help with sound clarity.

Replacing broken, lost or stolen headsets doesn’t come cheap. However, you can save money by getting longer life out of this essential piece of drive thru equipment. Here’s how:

First, train crewmembers on how to properly wear and use the equipment. Show them how to adjust the headset to comfortably fit their heads without stretching or pulling. Also, train them to hold the boom at the base when adjusting the position of the microphone. That way they don’t put too much pressure on the microphone tip, which can cause it to break off.

Teach employees to handle beltpacs with care. They should never disconnect the cables and connectors except when troubleshooting a problem. Also, require them to wear clothing clips to keep the beltpac cable from catching on something and getting torn off as they go about their jobs.

Repair problems like stuck buttons and dangling microphones as quickly as possible. Avoid the tendency to improvise do-it-yourself solutions such as taping a microphone in place. The problem will only get worse over time.

One way to save money on repairs is to have an equipment maintenance agreement (EMA) with a reputable drive thru repair company. That way you get unlimited repairs for one monthly fee. Some vendors will also offer free inbound shipping when you send in a headset for repairs.

Finally, clean each headset at the end of every day. Gently wipe all surfaces using a mild household cleanser. Use a soft-bristle toothbrush to remove dried food crumbs from in and around the buttons. Check for cracks or other structural problems.

If push comes to shove and you must replace the unit, consider a refurbished model. These are headsets that have been restored to factory specifications and cost much less than brand new units.

Take good care of your headsets and they will take good care of your drive thru!

Share

Blog Maintenance & Support

Ready to Move Faster at the Window?

From headsets and timers to NEXEO and advance-exchange repair, HME keeps your drive thru fast, accurate, and running. Talk with our team about what fits your lanes.