Blog Maintenance & Support

HME Drive Thru Vehicle Detector Loops – The First Step to Stellar Service

By HME • January 28, 2013 • 3 minute read

Share

Anticipating your customers’ needs and being prepared to meet them is a far better strategy for delivering great service than simply reacting to problems when they arise. While that may hold true for any business, it’s especially true for your QSR drive thru operation, where speed and quality of service are paramount to success.

At HM Electronics, we’ve been anticipating the needs of QSR operators for more than 40 years, with drive thru systems and other HME products that help to improve communication and enhance customer service at its most critical juncture – the drive thru lane.

A vehicle detector loop is an important piece of HME drive thru equipment that literally stands on the front lines of your drive thru operation. If your HM Electronics vehicle detector loop is not in top operating condition, you risk delayed service, frustrated guests and even lost customers. Here’s how you can get the most out of your HME System and keep customers coming back for more.

Ensure Optimum Performance

Properly installed and well-maintained detector loops, with correct detection settings, will keep your drive thru running smoothly. The first step is to make sure that drive thru system headsets are activated immediately when a vehicle approaches. That means the HME drive thru system headset wearer should hear a tone and outdoor sounds right away, as soon as the mic on the drive thru speaker post is activated.

Detection settings also play a critical role in your HME System performance. Detector loops create a magnetic field, activated by the presence of metal. If you’re having problems you may need to adjust the settings to alter the size of the detection field. For example, if you observe that vehicles with a high undercarriage are not being detected, adjust the settings so that the magnetic field extends higher. If vehicles are not being detected when traveling close to the car ahead of them, decrease the magnetic field so that a break between cars is detectable.

Ensure Proper Maintenance

Routine maintenance is the best way to ensure that your HME System keeps running smoothly, and you avoid the costly downtime associated with a breakdown. We recommend that your HM Electronics vehicle detection system be inspected at least once a year. The same holds for your HME drive thru speaker system and other drive thru systems and HME products.

Troubleshooting Tips For Your HME Drive Thru Vehicle Detector

The following quick troubleshooting tips could save you a service call.

  • If there is a problem with your HME drive thru vehicle detection system, first try resetting the drive thru system base station or unplugging it.

If that doesn’t work, check for the following:

  • Loose electrical and cable connections
  • Exposed or frayed loop lead-in wires
  • Whether drive thru menu board was relocated without also moving detector loops
  • Effects from severe inclement weather

HME Technical Support will be happy to guide you through the above over the phone. If you do need to schedule a repair technician, in the U.S. call 1.800.848.4468, option 1,2,3. For international service, call 1.858.535.6060, option 1,2,3.

Share

Blog Maintenance & Support

Ready to Move Faster at the Window?

From headsets and timers to NEXEO and advance-exchange repair, HME keeps your drive thru fast, accurate, and running. Talk with our team about what fits your lanes.