Blog Maintenance & Support

Headset Maintenance and Damage Prevention Tips

By HME • January 19, 2021 • 2 minute read

Share

Over the past few years, many things have changed in the QSR drive thru. One thing hasn’t – the importance of a well-functioning headset system to provide clear sound between customers and order takers. High-definition audio headsets, like the EOS | HD from HME, provide the crystal-clear sound. You provide the well-functioning by taking good care of your headsets with consistent cleaning and maintenance procedures.

Regular Cleaning

Clean the exterior of each headset at least once a day to remove dirt and grease from the surface. Never use spray cleaners or solvents, as these can corrode the headset. Instead, use mild soap and a clean, damp cloth to gently clean outside surfaces.

Headset buttons need to be regularly cleaned as well. In this case, use a small brush with soft bristles to gently remove crumbs that can collect in the crevices around the buttons.

Prevention and Maintenance

A little maintenance will go a long way toward keeping your headsets in good condition. Have crewmembers clip the headset cables to the backs of their shirts. This will prevent the cables from catching on nearby objects, which can cause damage to the cable and/or headset.

Replacing earmuffs on a regular basis will enhance sound quality, comfort and hygiene for your employees. Earmuffs tend to wear out quickly, so keep a good supply on hand so you can replace them every 60 to 90 days, or sooner if necessary.

Every once in a while, jiggle the headset cable and connector to listen for static. If you hear static, call your headset vendor’s tech support to determine whether you can handle it on your end or need to send the headset in for repairs.

Avoid headset contact with water at all times. Wear the device behind your hip when washing dishes or filling drinks. Never leave headsets lying on a kitchen surface where moisture can collect. Always store headsets in a clean, dry location when not in use.

Battery Care

Clean your headset batteries and the battery charger often, using a cotton swab dipped in rubbing alcohol. Be sure to unplug the charger before performing this procedure.

Remind employees to turn off the power on their communication pak before storing it, as leaving it on will drain the batteries. Also, overcharging batteries can reduce their service life, so recharge them only when the power gets low.

Share

Blog Maintenance & Support

Ready to Move Faster at the Window?

From headsets and timers to NEXEO and advance-exchange repair, HME keeps your drive thru fast, accurate, and running. Talk with our team about what fits your lanes.