Four Money-Saving Headset Maintenance Tips
By HME • May 23, 2016 • 3 minute read
Share
A quality drive thru headset system, like the ESO|HD high definition audio headset from HME, is the true workhorse of drive thru operations. From the moment customers first pull into the lane until they drive away with their meals, all communications depend on a properly functioning headset. And without clear communications, service times slow down and order accuracy decreases – two outcomes that no drive thru manager wants.
Today’s well-designed headsets are built to provide durable service in fast-paced drive thrus. But over time they will eventually wear down and need repairs or replacement, which can be an expensive proposition. Fortunately, you can extend the life of your drive thru headsets, and delay eventual replacement costs, by looking for small signs of wear and tear and fixing them before they become big problems.
1. Visible fractures or cracks.
Small cracks in the headset casing can quickly turn into bigger problems by allowing liquids to get inside. Liquid can seriously damage the electronic components that drive the headset, often to the point where they can’t be repaired. Since repairs cost much less than a replacement, send all headsets in for repair as soon as you notice a crack.
2. Damaged or missing ear foams.
These can make the headset uncomfortable to wear and can interfere with sound clarity for the crewmember. To prevent these problems from occurring, plan on replacing ear foams every 60-90 days at minimum. This will improve drive thru sound quality and promote good hygiene. And due to their low cost, ear foams are not an expensive item to replace.
3. Stuck or broken buttons.
Few things are more frustrating to crewmembers than a drive thru headset where the buttons don’t work properly – especially during busy dayparts. Fortunately, this is one area of the headset where a little bit of daily maintenance can make a big difference. Use a soft bristle toothbrush to remove debris from around the buttons, and use a soft cloth to apply a mild cleaner to the rest of the headset. If a button is completely broken, send in the headset for repair.
4. Taping batteries to the headset.
This strategy can work in a pinch, but it can also cause a loss of communication. Any time you reach the point where you’re using tape to hold batteries in place, it will save time and money by sending it in for repair sooner rather than later.
Share