Don’t Neglect Your Speaker Post!
By HME • November 7, 2016 • 2 minute read
Share
Clear communications between drive thru orders taker and customers is one of the most important factors in delivering fast, accurate service. That’s why more QSR operators are turning to high-definition audio drive thru headsets like the EOS | HD from HME. The remarkable sound clarity delivered by these innovative headsets helps reduce order mistakes while improving speed of service.
But there’s another important component to improving the quality of your drive thru communications – the speaker post. Remember that communications is a two-way process. Both sides have to be able to hear each other clearly in order to have effective communications. If your speaker post is poorly located or improperly maintained, it can degrade your sound quality to unacceptable levels.
The best option is always to have the customer microphone and speaker situated in a stand-alone speaker post. Stand-alone posts have a smaller acoustic sound chamber, which helps to improve sound clarity. Also, they can usually be located closer to the driver’s window, making it easier to pick up the sound when customers place their orders.
If a stand-alone speaker is not an option for your drive thru lane, you can still achieve good sound quality by making sure the customer microphone sits at least 42 inches above the ground. That will put it farther away from noise created by the engine yet still close enough for customers to comfortably speak into it. Putting the outbound speaker too close to the microphone can cause unwanted feedback, so make sure to have a distance of at least two feet between the speaker and microphone.
Regardless of where they are situated, speaker and microphone grills need to be kept clean to maintain good sound quality. Check them on a regular basis, and promptly remove any dirt, grease or other debris that may have collected in the holes or slots on the grill.
Another way to improve sound quality involves packing the enclosed areas around the speaker and microphone with acoustical foam. This helps reduce extraneous noises that today’s more sensitive microphones can easily pick up.
Finally, even microphones and speakers will wear out over time. Replacing them every three or four years will help keep your sound quality at the desired levels.
Share