Are Headset Problems Causing Downtime for Your Crew?
By HME • October 5, 2015 • 3 minute read
Share
Do you have an up-to-date drive thru headset system, such as EOS | HD from HME? Or are you still suffering from poor drive thru sound quality and frequent breakdowns that commonly occur with older drive thru systems?
Older drive thru headsets were good in their day. But thanks to new designs and better materials, today’s headsets are light years ahead of their predecessors in terms of durability and performance. If your drive thru headset system is more than five years old, you may experience the following problems on a regular basis.
Power suddenly goes dead.
This problem is common with older, wired headset systems, which require a wire across the headband to connect the electronics to the power source. When the headbands on these headsets get twisted or improperly used, the wire can break, causing the power to die and communications to be lost. The only remedy is to take better care of the headset or invest in a wire-free design that eliminates the possibility of broken wires.
Headset doesn’t respond.
Older headsets were typically designed with moving buttons, springs and mechanical switches. These kept the cost down, but were more prone to break down or wear out. If your headsets frequently stop working, it may be time to upgrade to a wireless drive thru system with no buttons or moving parts.
Frequently broken headset frames.
Let’s face it – headsets take a lot of use and abuse in a busy drive thru. The old plastic models simply couldn’t hold up very well day in and today out. Today’s steel components provide greater strength and durability, and help prevent wire breakage. Top-of-the-line headsets go beyond steel and use reinforced Xylex casting – an advanced material that provides the strength of steel in a lightweight plastic. These headsets can absorb more impact without damage, and can last a lot longer before needing replacement or repair.
Drive thru Batteries go dead at the wrong time.
The last thing you need is for headsets to stop working during a busy daypart because the batteries ran out of juice. New designs include built-in battery diagnostics that indicate when batteries need to be charged or aren’t working correctly.
Broken headsets create downtime for your crew, which means frustrated customers and lost business. You can avoid this unwanted scenario by keeping your drive thru headset system up to date with all the latest designs and technologies.
Share